BesCutter Steel Plate Full Production System
BesCutter

Steel Plate Full Production System

Up to 40 ft x 12 ft x 2 in plate | Shot Blasting, Painting & Drying Line

The Bescutter Steel Plate Shot Blasting and Painting Line is an integrated, highly efficient solution for surface preparation and coating of steel plates. It combines powerful shot blasting with an automated painting process, ensuring superior cleaning and consistent paint application. It processes large steel plates, removing rust and preparing surfaces for painting to a Sa2.5 rust cleaning grade, with variable processing speeds.

At a Glance

  • Shot blasting, painting and drying in one line
  • Plates up to 40 ft x 12 ft x 2 in
  • Sa2.5 rust cleaning grade
  • 10 blasting turbines (5 upper, 5 lower)
  • 1.6-6.6 ft/min variable speed

Highlighted Features

  • Integrated System: combines shot blasting, painting, and drying into a single, continuous process.
  • High Capacity Processing: handles steel plates up to 40 feet in length, 12 feet in width, and 2 inches thick.
  • Variable Processing Speed: cleaning speeds of 1.6 - 6.6 ft/min (variable) for both sides of the steel plate.
  • Superior Cleaning Grade: meets Sa2.5 rust cleaning grade (GB8923-88).

Specs

Steel plate length x width x thickness
≤ 40 feet x ≤ 12 feet x 2 inches thick
Processing speed (both sides)
1.6 ft - 6.6 ft/min Variable Speed
Rust cleaning grade
Sa2.5 (GB8923-88)
Processing material and strength range
Q235/Q345/65Mn/HT/ZG etc.
Surface roughness
15~70 micrometers (depending on shot size)
Compressed air pressure range
60 - 90 psi
Noise
≤95dB
Roller conveyor speed
20 - 200 in/min
Roller width
165 inches
Roller driven motor power
Motors, 8 HP each
Distance between rollers (blasting machine)
24 inches
Shot blasting turbine capacity
660 lbs/min
Shot blasting turbine power
25 HP
Shot blasting turbines
10 turbines (5 upper, 5 lower)
Abrasive circulatory system capacity
220 US Tons/hr
Abrasive control system maximum flow
1100 lbs/min single supplying shot value
Abrasive cleaning system
Rolling brush diameter: 36 inches
Painting driving model
Variable Frequency Drive
Spray gun transverse speed (frequency control)
65 - 260 ft/s
Spray gun transverse power
4.0 HP
Fan power
40 HP (share with drying room)
Spray gun quantity
4 pcs
Painting pump pressure ratio
30:1
Painting pump spray paint consumption
4.9 gal/min
Painting pump intake pressure
60 - 90 psi
Paint mist chimney
32 inches diameter, 50 ft high
Drying heating form
Natural gas
Temperature of drying room
≤180 degrees F (automatic thermostat)
Drying room length
40 ft
Drying power
40 HP (shared with painting room)

Feature Highlights

Workpieces
Workpieces
Painting and Drying Module
Painting and Drying Module
Shot Blasting Module
Shot Blasting Module

Welcome to Mullis Machinery, your one-stop-shop for high-quality CNC machinery and tooling, including Fiber Lasers, Routers, Panel Saws, Edge Banders, Press Brakes, Channel Letter Bending, C02 Lasers, Waterjets, Dust Collection and Software. We offer a wide range of products to meet your manufacturing needs.

Get a Quote