
EKO
ES6020
60 Ton, 2000 mm (78.7 in) Bending Length | Electric Servo Press Brake
The ES series is powered by servo motors that drive screws and belts directly, for fast up and down movement, stable repeat accuracy and high production efficiency. EKO press brakes use no hydraulic oil, and they use very little power when standing still; an energy storage system cuts it further.
ES Series Features
- High stability and durability: imported servo motors make the machine precise, stable and durable.
- High accuracy and long life: the lead screws and guide rails are imported C5 grade products.
- The highly precise D-axis screw guarantees high accuracy for each bend.
- D axis minimum movement setting unit: 0.005 mm.
- High-rigidity frame, quenched and tempered at up to 1200 degrees.
- Split upper mold clamp, used on all EKO models.
- A powerful, flexible and stable back gauge for demanding work.
Clean and Energy Saving
- Environmentally friendly: no hydraulic oil, which is a pollution source that is hard to dispose of.
- Very small standby power use when the machine is not moving.
- An energy storage system (accumulator) stores power while the screw nut moves down.
- Uses 1 to 2 kWh of power each hour in routine work.
